Manual vertical panel saw SVP 420 in addition of having a scoring unit with two split saw blades has an independent motor with mechanical insertion. SVP 420 MANUAL has as standard equipment the sliding of the head along two linear guides, permitting to the operator, an high speed of use, and a tuning more precise and accurate. These characteristics make SVP 420 MANUAL unique in the sector of vertical panel saws.
Electrical vertical measuring display
The electrical vertical measuring display precisely measures, in the order of millimeter centimes, making each cutting solution perfect.
Electrical horizontal measuring display
The electrical horizontal measuring display precisely measures, in the order of millimeter centimes, making each cutting solution perfect.
Sliding support for narrow pieces
You can place your small panels on a more advantageous height for its working.
Angle cutting device
The angle cutting device permits to incline the panel to be cut precisely.
Low level stop
Low level stop installed below the standard stop, able to comfortably cut small heavy panels loaded on lower supports instead of on the flappable device.
Extra short cutting device (RH)
If necessary, the extra short cutting devices allows to works a small pieces in confortable position.
Repeat cutting device of horizontal strips
Repeat cutting device of horizontal strips includes a stop to block the panels offering great working easiness when you are on the repetitive cutting phase.
TRK Dusting System
Dust catcher for horizontal cuttings to be linked to an aspirator.
The scoring unit with 2 split saw blades is extremely suitable for the working of chipboard panels, melamine wood and laminates. The width of the dent is in relation to the main blade creating a pre-cut and permitting a material cutting more precise and neater.
SVP 420 MANUAL vertical panel saw is equipped with a scoring unit with two split saw blades with a diameter of 80 mm with 0,25 HP independent motor with mechanical insertion. The main motor is not linked to the scoring unit and therefore it never overcharges.
Putsch® Meniconi SVP 420 MANUAL vertical panel saw has as standard equipment the sliding of the head along two linear guides permitting to the operator and high speed of use for a more precise and accurate panel cutting.
Putsch® Meniconi SVP 420 MANUAL machine has lower aluminium supports with polyzene carry-overs that create the most stable support base ever created before for a vertical panel saw. SVP 420 MANUAL is also equipped with mid-size fence for a comfortable and practical cutting.
Putsch® Meniconi SVP420 MANUAL panel saw has an automatic shifting frame where you can lay in total security the panels to cut. This grid has an automatic Putsch® Meniconi moving device that permits the removal of the blade during the horizontal cutting and prevents that the horizontal approaching strips can be damaged.
SVP 420 MANUAL is equipped with an welded steel frame with decimal cutting precision, the manual movement of the beam and the carriage for an horizontal cutting and vertical cutting and the plunging and returning of the blade group through ergonomic handle. The grid can be equipped with TRK dusting system for horizontal cutting and Eco system with TRK dusting for each vertical point of the frame.
Putsch® Meniconi SVP 420 MANUAL panel saw has a standard equipment with circular blade with 250 mm diameter. SVP 420 MANUAL Putsch® Meniconi panel saw can make wood panels, sandwich panels, reynobond® panels, alucobond® panels cutting, polycarbonate, polypropilene cutting, methacrylate cutting and plexiglass panels cutting very deep.
The saw unit of SVP 420 panel saw is moved along 2 linear guides, acting on the ergonomic Putsch® Meniconi handle. Putsch® Meniconi ergonomic handle with whom SVP 420 is equipped, permits a maximum cutting depth of 60 mm. A junction placed on the lower command handle allows a comfortable materials cutting also over the head of the operator. SVP 420 Putsch® Meniconi can do cuttings of wood panels, sandwich panels, reynobond® panels, alucobond® cutting panels, polycarbonate panels, polypropilene panels, methacrylate cutting and plexiglass panels cutting very depth.
This new machine has some special features and especially the sliding of the saw carriage on 2 linear guides, that is the most accurate guiding system available today. This system has been already experienced by Putsch® Meniconi on the first machine introduced in the 2004. Indipendent motorized scoring system with automatic power up by plunging the same by means of the front lever.
This new machine has some special features and especially the sliding of the saw carriage on 2 linear guides, that is the most accurate guiding system available today. This system has been already experienced by Putsch® Meniconi on the first machine introduced in the 2004. Indipendent motorized scoring system with automatic power up by plunging the same by means of the front lever.
In this HQ video you will see vertical panel saw SVP 420 at work and you will discover some of its peculiar features that make it top range among Putsch® Meniconi vertical panel saws. SVP 420 MANUAL panel saw has a standard equipment with liftable wheels, for a rapid sliding of the panels to section, it has a welded steel frame and lower aluminium supports with polyzene carry-overs.
Putsch® Meniconi, in all goods categories concerning it, guarantees a prompt Customer Assistance both for cutting wood machines, cutting plastic machines, Ledorex cut, brand new cnc machines, second-hand cutting machines and cutting panel saws machinery dating back to 5, 10, 20 or more years ago. Our company has the current best programs to identify each component of every horizontal panel saw and vertical panel saw. Putsch® Meniconi also has a great database including more than 20.000 items, that is components specially studied to guarantee national and international customers great ease of use and productive cheapness.
