With the brand new SVP 420 AUTOMATIC TOUCH panel saw we can set the measures both for vertical and horizontal cuts, through a touch screen panel.
Through the touch control panel, we can automatically set the position of the head to do horizontal cuts and the stop to do vertical cuts.
Automatic positioning of the knocker to do vertical cuttings
Through this new optional the positioning of the knocker is rapid and automatic through the touch screen, the installation of this optional increases the encumbrance of the panel saw by, carrying it from 5850 mm to 6490 mm.
Angle cutting device
The angle cutting device permits to incline the panel to be cut precisely.
Low level stop
Low level stop installed below the standard stop, able to comfortably cut small heavy panels loaded on lower supports instead of on the flappable device.
Cutting Device for Narrow Pieces
Repeat cutting device of horizontal strips
Repeat cutting device of horizontal strips includes a stop to block the panels offering great working easiness when you are on the repetitive cutting phase.
TRK Dusting System
Dust catcher for horizontal cuttings to be linked to an aspirator.
The measures can be established on a touch screen according to the position of the cutting head. When one turns the head, the display goes automatically from X axis to Y one and vice versa. On the display we can see the effective measure and the set quotation.
Thanks to this technology the positioning of the knocker is automatically and rapidly controlled.
Putsch Meniconi SVP 420 AUTOMATIC TOUCH vertical panel saw has as standard equipment the sliding of the head along two linear guides permitting to the operator an high speed of use for a more precise and accurate panel cutting.
SVP 420 AUTOMATIC TOUCH is equipped with a welded steel frame with decimal cutting precision, the manual movement of the beam and the carriage for horizontal and vertical cutting. The plunging and returning of the blade group happens through an ergonomic handle. The grid can be equipped with TRK dusting system for horizontal cutting and Eco system with TRK dusting for each vertical point of the frame.
Putsch Meniconi SVP 420 AUTOMATIC TOUCH panel saw is able to automatically perform vertical cutting and horizontal cutting aluminium sheets, plastic materials cutting, composite materials panels cutting. SVP 420 AUTOMATIC TOUCH panel saw has an automatic entrance and return of the blade group with the possibility to select the stop of the cycle end or return to the initial point with double advancing speed 12-24 m/1′ we can do cuttings on different kind of materials.
The scoring group with 2 split saw blades is adapt to cut chipboard panels veeners, melamine, and laminates. The width of the dent is in relation to the main blade creating a pre-cutting and permitting a material cutting more precise and faster.
SVP 420 AUTOMATIC TOUCH panel saw is equipped with a saw unit with two double blades with 80 mm diameter with independent 0,25 HP motor with mechanic insertion. The main motor never overcharges.
Putsch Meniconi SVP 420 AUTOMATIC TOUCH vertical panel saw is equipped with the head sliding along two linear guides allowing the operator a high speed of tuning and horizontal cuttings.
On the front part of the frame of this Putsch Meniconi panel saw there is a movable supporting plan where we can load in total security the strips to cut. This grid has a pneumatic shifting frame that permits the going away of the circular blade and avoid that the horizontal approaching strips can be damaged. A Putsch Meniconi system placed on SVP 420 AUTOMATIC TOUCH makes an automatic control of the movement.
Putsch Meniconi SVP 420 AUTOMATIC TOUCH has lower supports in aluminium with polizene carry-overs that create the most stable laying base. This automatic cutting machine is equipped with mid-fence for a comfortable and practical cutting also at heights superior to the user’s head.
Our corporation, in all goods categories concerning it, guarantees a prompt 24 hours a day and 7 days 7 days Customer Assistance both for cutting wood machines, cutting plastic machines, Ledorex cut, brand new cnc machines, second-hand cutting machines and cutting panel saws machinery dating back to 5, 10, 20 or more years ago. Putsch Meniconi company has the current best programs to identify each component of every horizontal panel saw and vertical panel saw. Our enterprise also has a great database including more than 20.000 items, that is components specially studied to guarantee national and international customers great ease of use and productive cheapness.